www.rcleo.com - www.depron.eu - www.depronplanes.com

Home » Krick Dumas Aeronca C-3 Parkflyer Kit 1.016mm Span #DS1813 ***

Krick Dumas Aeronca C-3 Parkflyer Kit 1.016mm Span #DS1813 ***

€110.00

EAN 4025792134159

Dumas Aeronca C-3 Park Flyer Kit
We are pleased to introduce the Aeronca C-3, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.

Kit features:
1 Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16 inch diameter wire front, .041 diameter wire rear, requires bending


FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending


INCLUDES

All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows


REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment


SPECIFICATIONS

Length: 22" (559mm)
Wingspan: 40" (1016mm)
Wing Area: 329 sq.in. (21.25 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
Control Throws:
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 1" (25mm)

 

This products has to be build, it is not ready yet

The kit only containts the kit :

  • No electronics
  • No additional hardware
  • No battery